Sunday 25 February 2018

Experiment with Copic Refills and the gelli plate...

Hello everyone,
Hallo allemaal,

A little while ago I saw a video by Diny Sprakel and her friend where they were experimenting with the Gelli plate and Copic Refills. So I thought I'd try this as well... and it was fun ! I will certainly use this technique again !

Een tijdje geleden zag ik op Facebook een video door Diny Sprakel & vriendinnen waar ze aan het experimenteren waren met de Gelli plate en Copic navullingen. Ik dacht, dat wil ik ook wel eens proberen... En leuk dat het was, ik ga deze techniek beslist vaker gebruiken.

You'll find the video HERE

Hier is de bewuste VIDEO


Here are my backgrounds.... I will use them in my projects this week ! So watch this space !
Hier zijn mijn achtergrondjes.. Ik ga deze in my projecten gebruiken deze week dus houd mijn blog en mijn FB in de gaten !


For this print I have used/voor deze heb ik gebruikt:  Copic Refills Y15 - YR07 - R29. 
I also used a stencil by Studio Light from their Mixed Media Line MASKMM26. Ik heb ook een stencil gebruikt van Studio Light van hun Mixed Media Line MASKMM26.  


For this print I have used refills / Voor deze print heb ik gebruikt: YG17 - B02
I have also used a doily stencil and a Foam Stamp by Studio Light FOAMMM05. Ik heb ook een Doily stencil en een foamstempel can Studio Light gebruikt FOAMMM05. 
I used the refill to ink up the foam stamp and then stamped it over the design on the gelliplate.
Ik heb ook voor de foam stempel de refill gebruikt en deze over het patroon op de gelli plate gestempeld alvorens de print te maken. 



This print is made in the same way as the previous one.  
I have used Y15 - YR07 and R29 for stamping and I used a light yellow acrylic paint to pull the print instead of white.
Deze print is op dezelfde manier gemaakt. Ik heb Y15 - YR07 en R29 gebruikt om de veer te stempelen en een light gele acrylverf in plaats van wit om de print te maken. 


For this print I have used V25 - B02 and YG17 and a baroque stencil. I used white paint to pull the print. 
Voor deze print heb ik V25 - B02 en YG17 gebruikt en een barok stencil. Ik heb witte acryl verf gebruikt om de print te maken. 



This print was made with the same feather stencil and Copic refills Y15 - YR07 and R29. I used white paint to pull the print. 
Deze print is gemaakt met hetzelfde Studio Light stencil and Copic Refills Y15 - YR07 en R29. 
Ik heb witte verf gebruikt om de print te maken. 



For this print I stamped the foam stamp with Copic refills B02 and V25 on the gelli plate.  I then brayered white paint over it and pulled the print. 

Deze is op een andere manier gemaakt. Ik heb de foam stempel verschillende keren afgedrukt op de gelli plate. Uiteraard heb ik Copic Refills gebruikt om te stempelen. De kleuren B02 en V25. Daarna witte verf erover gebrayerd en geprint. 



This is B02 and V25 with the feather stencil by Studio Light. Of course I used white paint to pull the print. 
Deze is gemaakt met B02 en V25 en het stencil met de veren van Studio Light. Natuurlijk ook weer witte verf gebruikt om de print te maken. 


Deze is op dezelfde manier gemaakt met YG17 en B02. Er zat nog wat orange op de plaat zo te zien...
This one is also made with the same stencil. I used YG17 and B02 for this one. It looks like there was some orange left on the plate...



Voor deze print heb ik weer met de foam stempel gestempeld. Ik heb R29 gebruikt alvorens de witte verf erover te rollen en de print te maken.
For this one I stamped the foam stamp again. I used R 29 this time. Then rolled over the white paint and pulled the print. 



Deze is weer inkt Y15 - YG17 en B02 en een stencil. Je moet er alleen aan denken je stencil op de kop op de gelli plate te leggen zodat je de tekst in de print kan lezen. 
This one is Y15 - YG17 and B02 and a stencil. Just remember to put the stencil face down on the gelli plate so the text is legible in the print. 


Deze twee zijn niet zo mooi. Ik denk dat mijn gelli print een beetje vies was dus het is een beetje bruin geworden..
And these last two were actually not that good as I think my plate was dirty so I got brown... 




Ik hoop dat jullie dit leuk vonden !
I hope you enjoyed this experiment ! 

Thank you for stopping by today ! 

8 comments:

  1. I've never heard of using Copic refills on the gelli print. Lovely prints, Corrie. Can't wait to see what you do with them!

    ReplyDelete
  2. Amazing backgrounds Corrie - they really do look fabulous! Can't wait to see what you do with them xx

    ReplyDelete
  3. super, wat een leuke techniek niet?
    Groetjes
    Maria

    ReplyDelete
  4. I love them all with me too! I loveGelli painting! Thanks. Please hook me up! You and I inspire each other. Smile today

    ReplyDelete
  5. What a wonderful technique; I've not tried alcohol inks on the Gelli plate, and this is a MUST DO - many thanks for sharing this!!!

    ReplyDelete